A050H

Megapixel IP Camera A050H

A0X0H is a set of models made by Absolutron that was developed specifically for high-end security systems.

You can request your cameras via our feedback form.
You will be contacted for other.
ModificationSensorH.264FPSSensitivityPowerDynamic range
A050H5 MPyes140.3Lux4.8Watt70Order
A030H3.5 MPyes200.3Lux4.8Watt70Order
A028H2 (16/9) MPyes300.1Lux4.8Watt70Order

Specification

- A050H incorporates a progressive scan CMOS imager with a 1/2-inch optical format and 5.0 million pixels with infrared filter.

- The camera supports the standard H264.

-Maximum resolution is 2592(H) x 1944(V) pixels. The camera’s aspect ratio (horizontal vs. vertical lines) is user configurable by either clipping of scaling.

-In the case of resolution set by clipping the frame rate will grow while field of view will be reduced. Coordinates of the clipped area in the respect to the full frame image can be specified.

-Minimum light requirement to produce a color image shall be approximately 0.30 lux (0.03 fc) with a f1.2 lens and frame rate of 5fps.

-The camera provides automatic white balance, automatic exposure, gain control, saturation control, sharpness control, electronic shutter, backlight compensation, gamma correction.

-Proprietary “owl eye” noise reduction technology allows for improved image quality in the dark conditions. Our cutting edge processing techniques ensures noise reduction without sacrificing image quality

-Build in motion detector has 64 zones available independently on resolution. Zones are configured in 8x8 grid. Matrix of zone activity determines which of the zones are used for motion detection and which are ignored. Frames with motion detected can be marked.

-The Camera provides on-screen, digital, pan/zoom on both live and recorded video.

-User settings can be ether used for a session of permanently stored into flash memory. Factory presets can be restored if needed.

-The Camera possesses build-in watchdog for protection against power failures.

-Ability to remotely update firmware.

-The camera provides integrated support for IP, TCP, UDP, ICMP, ARP, DHCP, HTTP, RARP, BOOTP, TFTP, RTSP, RTP, RTCP and multicast protocols.

- Power Consumption: typically 4.0, max. 4.8 watts.

Main Camera Parameters

  • Resolution up to 2592x1944
  • 14 fps frame rate at 5.0 megapixels.
  • Auto exposure (AE).
  • Auto white balance (AWB).
  • 8x8 zone motion detector;
  • Power Over Ethernet (POE);
  • Intelligent power manager.
  • Owl-eyeTM noise reduction, low noise at low-light.
  • Speed-priority or Aperture-priority exposure control modes;
  • Network data transfer speed up to 80Mbit/s.
  • Watch-dog timer.
  • Fast automatic algorithm for camera installation.
  • High sensitivity CMOS image sensor.